Step 01
Email us your car
Tell us what you drive, where it lives, and how you sit in it. We reply with a quote and a date.
Mobile 3D scanning · Custom sim rigs
Your cockpit,
copied exactly.
We drive to your car, 3D scan the interior, and build an extruded aluminum sim rig that puts the wheel, seat, and pedals exactly where your real car puts them. Then we tune the hardware to match how it feels to drive.
±1.5 mm
Contact point tolerance
90 min
Typical scan visit
40-series
Extruded aluminum profile
4–6 weeks
Scan to delivery
How it works
Four steps, one measurement.
Everything after the scan is derived from it. No adjustable-everything rig you spend a year dialing in — the geometry is already correct the day it arrives.
Step 02
We scan on site
We come to your garage, shop, or paddock and scan the full cockpit — seat, wheel, pedal box, shifter, cage. The car never moves.
Step 03
We design the rig
The scan becomes a CAD model. We build the frame around your seating position and send you the drawing to approve before anything is cut.
Step 04
We build and deliver
Cut, assembled, wired, and calibrated in our shop, then delivered and set up. You sit down and it feels like your car.
From the scan
What gets matched.
Every dimension below comes off your vehicle, not a spec sheet. If your seat is on a 20 mm spacer and your pedal box is shimmed, the rig is too.
| Seat position | Height, rearward set, floor angle |
| Seat back | Recline angle to 0.5° |
| Wheel center | Height, reach, column angle |
| Pedal face | Angle, spacing, floor drop |
| Shifter | Gate position and knob height |
| Handbrake | Lever position and travel |
| Eye line | Dash height, screen placement |
| Footwell | Width, dead pedal, tunnel |
Hardware
Tuned to feel like the car.
Brake pressure, not brake travel
We measure the force it takes to lock your real brakes and set the load cell to the same number. You brake by feel, not by memory.
Matched steering
Wheel diameter, rim section, rotation, and steering ratio carried over from the car, with torque set so the effort lands where yours does.
Your seat, your belts
We mount the same seat model on the same rails and angle, with the harness routed through the same points. Bring your own shell if you'd rather.
Real controls
Sequential, H-pattern, or paddles — matched throw and detent weight. Wheel buttons laid out the way your car's are.
Request a scan
Send us your car.
We answer every email within one business day with a quote and the next available scan date in your area.
car2sim@leglake.comInclude in your email
- Vehicle Year, make, model — or class and chassis
- Location City and where the car is stored
- Seat What's in it now, and whether it moves
- Use Practice, coaching, or a show build
- Photos Two or three of the interior, any angle